There is no single price for a quartz countertop, because the figure is built from the material you pick, how the job sits on the slab, the cutouts it needs, the edge detail and what the fitting day looks like. Two kitchens that look almost identical in a photograph can land on very different totals, and neither supplier is being dishonest about it. Both are sold as countertops across Northern Europe and as worktops in the UK; the material is the same either way.
That is also why a serious supplier will not commit to a final figure from a rough sketch. A number given before anyone has measured the room is a guess, and guesses get corrected later, usually in the wrong direction for the customer. Videa Stone supplies, fabricates and installs stone countertops, so what follows is a plain description of what sits inside a quote, and how to read one before you commit.
What affects the cost of a quartz countertop
A quote for quartz countertops, or countertops in American English, is not one rate per square metre with everything else included. The quartz countertop price is a stack of separate costs, each moving with decisions made in the kitchen design.
The material itself
A plain, single colour quartz usually costs less than a marble-look design with strong veining running through it. Decorative series are produced in smaller volumes and the manufacturer's own pricing reflects that. Within the same quartz range you can move from the affordable end to a premium series without changing anything else about the job. If the budget is tight, this is the first place to look, because it touches every square metre of the work.
Thickness and the edge you choose
A thicker slab costs more per square metre because there is more stone in it. A chunky edge reads as more substantial, and there are two ways to get one. You can buy the thicker material outright, or mitre a thinner slab, which means cutting the edge at an angle and bonding it to build a deeper front face. Mitring uses less material but takes workshop time and careful jointing, so it is not automatically cheaper. A straight polished edge is the simplest option; every profile beyond that adds machine time.
How the job sits on the slab
Square metres alone do not tell you what a countertop costs. Stone is bought as whole slabs, so what matters is how efficiently your shapes lay out on them. A straight run nests neatly and leaves little waste, while an awkward L-shape with a large island can force a second slab even when the total area looks modest on paper. You pay for the slab, not only for the pieces that reach your kitchen.
Cutouts and openings
Every hole in the stone is a separate operation. A sink cutout, a hob cutout, tap holes and socket openings each take cutting time, and the type matters as much as the count. An undermount or integrated sink needs its internal edges cut precisely and polished, because they stay visible once the sink is in place; a drop-in sink hides its own cut edge. Drainage grooves milled beside the sink are another job again.
Extras that are not the countertop itself
Upstands, full height splashbacks, window sills, waterfall ends where the stone runs down the side of an island, and matching shelves are all cut from the same material and priced on top of the main run. They are worth raising early, because they change how much slab the job needs.
Vein matching across joints
If you want the veining to continue across a joint or turn a corner as though the stone were one piece, that has to be planned before anything is cut. The pieces are positioned on the slab so the pattern lines up, which usually means accepting more offcut, and the layout takes longer. It is a genuine cost rather than a markup.
Templating, access and the fitting day
Templating is the on-site measuring step, and it is what makes the finished countertop fit the room rather than the drawing. Walls are rarely square, floors are rarely level, and a template records the room as it actually is; you can see how it works on our measuring page. The fitting day then depends on conditions: which floor the kitchen is on, whether the slab can be carried in without a narrow staircase, and whether an old countertop has to come out first; more on that is on our installation page.
How to compare two stone countertop quotes fairly
A quote that looks cheaper is often simply shorter. Before you compare totals, check that both documents describe the same job.
- The exact material, series and finish, not just the word quartz
- The thickness of the slab and the edge profile
- Every cutout listed, with the sink type named
- Upstands, splashbacks and window sills, if you want them
- Whether templating is included or charged separately
- Whether delivery and fitting are included
- Whether removing and disposing of the old countertop is included
- Who seals the joints and makes good afterwards
Where a quote goes quiet on one of these, the work has not disappeared. It turns up on the final invoice, or becomes your problem on the day. Ask for the missing lines in writing and compare again. The cheapest number at the enquiry stage is often not the cheapest at the end.
How to bring the cost down without spoiling the result
There is a difference between saving money and cutting corners, and most of the savings live in the design rather than the workmanship.
Choosing a plain or lightly patterned colour instead of a heavily veined premium design changes the cost across the whole job and still gives you a hard, non-porous surface - one that does not absorb liquids - that needs no sealing. Keeping the edge simple has the same effect, as does reducing the number of cutouts and choosing a standard sink shape over something unusual. If the layout avoids a piece that will not nest on the slab, the material goes further.
For smaller jobs there is another honest option. Our outlet section holds offcuts and surplus pieces, listed with a real price per square metre and available straight away. They are limited in size, so they will not cover a full kitchen, but for a utility room, a bathroom vanity or a window sill they are the sensible place to start.
What sits behind the price
Videa Stone fabricates the finished countertop in its own workshop in Latvia and delivers across Sweden, Denmark and the rest of Northern Europe. Because the cutting, the edge profile and the fitting all happen in one place, a quote covers the whole job instead of a slab price with the rest added afterwards. The slab material itself comes from Cosentino (Silestone, Dekton and Sensa), TechniStone, Laminam and Nuovo Corso; the cutting, the edge profile and the fitting are ours.
Frequently asked questions
Why will nobody quote a quartz countertop over the phone?
Because the price depends on details a phone call cannot confirm: the exact material and thickness, how the shapes nest on a slab, the number and type of cutouts, the edge profile and the access at the property. A figure given without those is a guess. A written quote based on your drawings gets close, and templating on site makes it final.
Is quartz cheaper than natural stone?
Not automatically. Quartz is engineered, so its pricing is predictable and consistent between batches, while natural stone depends on the individual block, its rarity and its markings. A plain quartz usually sits below a rare natural stone, but a premium quartz design can cost more than a common granite. Compare named materials, not whole categories.
Does a thicker countertop always cost more?
A thicker slab costs more per square metre because it contains more stone. A thinner slab with a mitred edge can look just as substantial, and it uses less material while adding workshop time. Which of the two works out better depends on the size and shape of the job, so it is worth asking for both to be priced.
What do you need from me for an accurate quote?
Measurements or a kitchen drawing with the runs marked, the material and finish you are considering, the thickness and edge you like, and the sink and hob you have chosen or their model names. Mention upstands, window sills and any island detail. With that we can quote properly, and templating confirms the final figure.
Getting a figure for your own kitchen
If you have measurements or a drawing, send them over and we will price the job as it really is, with the cutouts, edges and fitting written into the quote rather than left out of it. If you are still choosing between materials, tell us the budget you have in mind and we will say honestly what it reaches. Start on our contact page.
